Services Process Experience Skills Cases Blog Contact
🌐 UA·RU·EN
October 26, 2026 · 10 min read

Google Analytics 4: GA4 Setup Done Right and the Reports a Website Owner Should Check

Google Analytics 4 is installed on almost every website, but only some of those installs are set up properly. The typical picture: the tag is there, but there are no key events, and the team's own visits are counted as customer traffic. Below is a step-by-step GA4 setup, the settings you must change right after installation and the 6 reports an owner should check every month to see where leads actually come from.

Contents
  1. What GA4 is and how it differs from Universal Analytics
  2. GA4 setup: a step-by-step guide
  3. Key events: what counts as a conversion
  4. How to exclude your own traffic in GA4
  5. Data retention: change 2 months to 14
  6. Linking Search Console and Google Ads
  7. 6 GA4 reports an owner should check every month
  8. Consent Mode: a brief and careful overview
  9. Common GA4 setup mistakes
  10. Checklist: a correct Google Analytics 4 setup
  11. Frequently asked questions
  12. Summary

What GA4 is and how it differs from Universal Analytics

GA4 is the current version of Google Analytics, built on events. Its predecessor, Universal Analytics, stopped processing data for standard properties in July 2023, so there is no alternative within the Google ecosystem today.

The main difference is the data model. Universal Analytics was built around sessions and pageviews. In GA4, every action is an event with parameters: a page view, a click, a form submission, a purchase with an order value.

AspectUniversal AnalyticsGoogle Analytics 4
Data modelSessions and pageviewsEvents with parameters
GoalsGoals, up to 20 per viewKey events
Bounce rateA single-pageview sessionShare of sessions without engagement
Main quality metricBounce rate, pages per sessionEngagement rate

An engaged session is one that lasts longer than 10 seconds, or includes a key event, or has 2+ page views. Bounce rate in GA4 is simply the inverse of the engagement rate.

Events, not sessions

The quality of your GA4 data depends on which events you set up and which of them you mark as key events. Without them, GA4 shows traffic, not business results.

GA4 setup: a step-by-step guide

The basic setup takes 30-60 minutes. Key events and filters, including testing, take a few more hours.

01

Create an account and a property

In analytics.google.com, go to Admin and create an account for your company and a property for the website. Set the correct time zone and currency right away: they define how data is split by day and how revenue is reported.

02

Create a web data stream

Add a Web data stream with your site URL and you will get a Measurement ID in the G-XXXXXXXXXX format. One website needs one web stream, even if it has several language versions.

03

Install the Google tag

There are two ways: add the Google tag (gtag.js) to the code of every page or through a field in your CMS, or install a Google Tag Manager container and create the Google tag inside it. I recommend GTM: phone, messenger and form clicks can then be tracked without a developer. The key rule is to use only one method, otherwise your data will be doubled.

04

Check enhanced measurement

Enhanced measurement is on by default in the web stream settings. Without any code it collects page views, scrolls to 90% of the page, outbound clicks, site search, YouTube video views, file downloads and form interactions. Do not rely on the automatic form events as leads: they often fire inaccurately.

05

Check that data is coming in

Open your site and look at the Realtime report: your visit should appear within a minute. To see every event with its parameters, turn on GTM Preview mode and open DebugView in Admin.

Key events: what counts as a conversion

Key events are actions that have value for the business. Until 2024, GA4 called them conversions; Google Ads still uses the term "conversion". An event has to be collected first and then marked as a key event in Admin - Events.

ActionHow to track itExample event name
Form submissionA trigger on the thank-you page or on a successful form submission in GTMgenerate_lead
Phone clickA GTM trigger on clicks on links starting with tel:phone_click
Messenger clickA trigger on wa.me, t.me and similar messenger linksmessenger_click
PurchaseAn ecommerce event with order value, currency and order IDpurchase

For forms, count successful submissions, not button clicks. For an online store, the purchase event should pass value, currency and transaction_id - the order ID protects you from double counting when the page is reloaded.

I will review your Google Analytics 4

Send me your website address and I will check whether the tag is installed correctly, whether key events exist and whether your own visits are being counted.

Message me on Telegram

How to exclude your own traffic in GA4

You, your managers and your developer visit the site every day, and on a small site this noticeably distorts the data, even key events if the team tests forms. Excluding internal traffic takes two steps, and the second one is often skipped.

An active filter does not apply retroactively, and excluded data cannot be recovered. Many providers change IP addresses, so use ranges: the "begins with" or "IP address is in range" (CIDR) conditions.

In the same place you will find List unwanted referrals: add your payment providers, such as PayPal or Stripe, otherwise purchases will be attributed to the payment gateway instead of the real source.

Data retention: change 2 months to 14

By default, GA4 keeps event-level and user-level data for only 2 months. A standard property can choose 2 or 14 months. Change it to 14 in Admin - Data collection and modification - Data retention.

This setting affects Explorations - custom reports, funnels and segments - and does not limit standard reports. But with the default setting you will not be able to build a funnel for last season, and the change does not apply retroactively.

Linking Search Console and Google Ads

GA4 does not show search queries - Google Search Console does, so linking the two is a must.

6 GA4 reports an owner should check every month

These six reports are enough to understand which channels work and what changed over the month.

ReportWhere to find itWhat it tells you
Traffic acquisitionReports - AcquisitionHow many sessions each channel brought: organic search, paid, direct, social, referral
Key events by sourceThe same report, Key events column with a specific event selectedWhich channels bring leads, calls and sales, not just visits
Pages and screensReports - EngagementWhich pages get the most views and how long people stay on them
Landing pageReports - EngagementWhich pages start sessions and which of them drive key events
Google organic search trafficSearch Console collectionOrganic impressions, clicks and positions by page next to on-site behavior
RealtimeReports - RealtimeFor testing: whether the tag works and events fire after site changes

Compare each month with the same month last year because of seasonality. To evaluate SEO, look at key events from the Organic Search channel rather than visits: that is what shows whether your SEO budget pays off. For the basics, see what SEO is.

Consent Mode is the mechanism that tells the Google tag whether a visitor has agreed to analytics and advertising cookies. Google requires Consent Mode v2 for ad personalization and measurement for users in the European Economic Area.

If you have visitors from the EU or the UK, you need a consent banner (CMP) that supports Consent Mode. After you launch it, some visits will disappear from reports, so a drop in GA4 traffic is expected. Legal requirements depend on the country, so it is worth agreeing on the banner setup with a lawyer.

Common GA4 setup mistakes

An analytics review is a standard part of an SEO audit. And if your contractor reports only traffic without key events, it is a reason to check what they are actually doing.

Checklist: a correct Google Analytics 4 setup

Frequently asked questions

Can I do the GA4 setup without a developer?

Yes. Create a property and a web stream, then add the Google tag through your CMS field or Google Tag Manager. The basic setup requires no code. A developer may be needed for a purchase event with the order value.

Why don't GA4 numbers match my CRM or Search Console?

That is normal. GA4 does not see some visits without cookie consent or with ad blockers, and Search Console counts clicks, not sessions. The trend matters more than an exact match.

Do I need GA4 if I already have Search Console?

Yes, they are different tools. Search Console shows how your site appears in search before the click, while GA4 shows what people do on the site after it and whether they become customers.

How much does a GA4 setup cost?

If your site is on my monthly SEO service, analytics setup is part of the work, and monthly SEO starts from $450/month. The first step is a free express audit, where I check GA4 as well.

Summary

GA4 is useful when it shows business results, not just traffic. The minimum to do: one tag without duplicates, key events for forms, calls, messengers and purchases, an active internal traffic filter, 14-month data retention and a Search Console link. After that, checking six reports once a month is enough.

I will set up analytics and SEO for your website

I will review GA4 and Search Console, set up key events and filters and show you which channels and pages actually bring leads. The first step is a free express audit.

Send a request

Leave a request

Describe your task - I will reply within a few hours and suggest where to start in your case.

Thank you, your request has been received. I will get back to you shortly.
DZ

Dmytro Zaichenko

Freelance SEO Specialist · 13+ years of experience · 70+ projects · zaichenko.pro